Ankleshwar Gidc, Gujarat
Industrial Pumps
Leading Manufacturers, Exporters, Wholesaler, Retailer and Distributor of Air Operated Diaphragm Pump, Center Discharge Submersible Dewatering Pump, Chemical Dosing Pump, Chemical Process Centrifugal Pump, Fuel Injection Gear Pump, Hand Operated Hydro Test Pump, Horizontal Inline Multistage Pump, Industrial Solar Pump, Light Horizontal Multistage Centrifugal Pump, Magnetic Drive Centrifugal Pump, Monoblock Centrifugal Pump, Motorised Barrel Pump, Motorised Hydro Test Pump, Openwell Horizontal Submersible Pump, Plunger Pump, Pneumatic Submersible Pump, Polypropylene Chemical Process Pump, Polypropylene Monoblock Pump, Polypropylene Vertical Pump, Progressive Cavity Screw Pump, Rotary Gear Pump and Rotary Lobe Pump from Ankleshwar.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Air Operated Diaphragm Pump |
| Color | Green |
| Condition | New |
| Material | Cast Iron, Cast Steel, SS-304/L, SS-316/L, Aluminium |
| Maximum Head Pressure | Up to 70 Meter |
| Maximum Flow Rate | Up to 55 M3/hr |
| Size | Up to 3” |
| Maximum Particle | 6.35 mm |
| Air Pressure Required | 3 to 7 kg/cm2 |
| Air Inlet | ½” to ¼” |
| Range | DAD |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Air Operated Double Diaphragm Pump DAD Range is widely used in Solvents, Slurry Transfer, Barrels, Acidic Material, High Viscous Liquids, Abrasive Media, Transfer and loading/unloading HCL, Sulphuric acid, Caustic liquid, Water treatment, Corrosive Gasses, etc . .
Features
- Self Priming Capability.
- Continuously adjustable via controllable air volumes.
- Simple Startup.
- Low Maintenance.
- Easy to operate.
- Gentle displacement pumping.
- Self-adjusting when the medium changes.
- Resistant to dry running and runs smoothly with solid.
- No Shaft Seals.
- No drives or rotating parts in the pumped medium.
- Current-less drive via compressed aor.
- This pump are able to run dry without the need for oil expensive high quilty lubricants.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Certification | ISO 9001:2008 |
| Application | Industrial |
| Fuel | Electric |
| Automatic Grade | Semi Automatic |
| Pressure | High Pressure |
| Maximum Head Pressure | Up to 36 Mtr |
| Maximum Flow Rate | Up to 335 M3/hr |
| HP | Up to 60 HP |
| Speed | 2880 rpm |
| Sealing Arrangement | Dual Mechanical Seal Fitted |
| Impeller Type | Non-Clog Semi Open |
| Material Construction | Cast Iron, Cast Steel, SS-304/L, SS-316/L |
| Range | DSD-C |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Vertical Submersible Dewatering Pump DSD-S & DSD-C Range is widley used in
- Pumping waste water in Residential apartments, Multistorey buildings
- Pumping waste water in Hotels, restaurants and hospitals
- Waste water without solids – Sump drainage
- Waste water treatment plants
- Flood water pumping
Features
- Dry type submersible induction motor Class “F” insulation .
- Shaft and fasteners are in stainless steel to enhance life .
- Impeller and casing are coated with chemical resistance coating to improve life and performance .
- Cable connectors filled with resin prevents water leakage into the motor through the cable wire .
- Dual mechanical seal prevents water entry into the dry motor portion at two interfaces, one at pump portion to oil chamber and another at oil chamber to dry motor portion .
- Open type impeller prevents clogging of small solids and allows sand and silt to pass through. .
- Solid handling size up-to 10 mm .
- Built-in miniature thermal overload protector prevents coil from burning out due to improper line voltage, impeller jam and high temperature etc.,
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Chemical Dosing Pumps |
| Color | Green |
| Condition | New |
| Maximum Head Pressure | Up to 180 Meter |
| Maximum Flow Rate | Up to 2000 LPH |
| Design Pressure | 20 Bar |
| Maximum Temperature Capacity | Up to 200֯ C. |
| Material | SS-304/L, SS-316/L, Polypropylene |
| Range | DDP |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Chemical Dosing/Metering Pump our DDP Range is widely used to add a caustic chemical or an acid to a water storage tank to neutralize the ph. It can also be used as a chlorine pump to kill bacteria. A chemical dosing pump is designed to operate in challenging situation, such as high temperature and high pressure environments.
Features
- Reliable metering.
- Easy to maintain.
- Able to accommodate dry running.
- Can work with corrosive, abrasive, viscous fluid which make them utilize for a wide range of industries.
- They can be used in high temperature , high pressure applications to inject chemicals.
- Simple Control.
- Flexible and suitable for any environmental or situation.
- The flow control system prevents downtime, even with variable process parameters such as fluctuations in system pressure.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Chemical Process Centrifugal Pump |
| Condition | New |
| Automatic Grade | Semi Automatic |
| Maximum Head Pressure | Up to 150 Mtr |
| Maximum Flow Rate | Up to 500 M3/hr |
| Design Pressure | 16 Bar |
| Maximum Temperature Capacity | Up to 200֯ C |
| Impeller Type | Semi Open / Close |
| Speed | Up to 3500 Rpm |
| Material | Cast Iron, Cast Steel, WCB, SS-304/L, SS-316/L, Alloy 20, Hastelloy C |
| Range | DCP |
Preferred Buyer From
| Location | Anywhere in India |
Centrifugal Chemical Process Pump our DCP Range is widely used for Pharmaceutical Industries, Textile Industries, Chemical Industries, Paper & Pulp. Also use media of Acid, Ammonia, Dyes, Caustic, Alcohol, Oils, Solvents, Aromatics, Process Plant, Water treatment, Effluent, Polymers, Plating & Electroplating, Pharmaceuticals, Petrochemical Industry.
Features
- Dynamically balanced rotating parts ensure minimum vibrations .
- Designed for automatic air release during priming .
- Simple in Construction due to les number of parts.
- Less Maintenance Cost.
- Inside and outside of pump covered by anticorrosive paint
- Suitable for large discharge with small head.
- Their Output is very steady and consistent
- Designed to prevent overloading and motor burning .
- Less Wear and tear and can handle dirty water.
- Replaceable wearing parts results in longer life .
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Fuel Injection Gear Pump |
| Certification | ISO 9001:2008 |
| Color | Green |
| Condition | New |
| Maximum Head Pressure | Up to 300 Meter |
| Maximum Flow Rate | Up to 6000 LPH |
| Size | Up to 1” |
| Speed of Pump | 1440/2880 RPM |
| Material | Cast Iron, Cast Steel |
| Range | DLD |
Preferred Buyer From
| Location | Anywhere in India |
Fuel Injection Gear Pump DLD Range is widely used in Oil Industries, Mining Industries, High Viscous Liquids, Hydraulic System, etc. . .
Features
- Easy to use and maintain
- Low cost
- Relatively silent operation
- High work efficiency
- Insensitive to fluid viscosity and density
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Hand Operated Pumps |
| Certification | ISO 9001:2008 |
| Color | Green |
| Condition | New |
| Automatic Grade | Manual |
| Pressure Max | Up to 710 Kg/cm2 |
| Capacity | Up to 100 Ltr |
| Pump | 1.5 m Hose Pipe Pressure Gaug |
| Range | DHH |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Hydro Test Pump DHH & DMH Range is widley used in Boilers, pressure vessels, C. I. mains, casting parts Gas cylinder, pipes & tubes parts etc. . .
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Horizontal Multistage Pump |
| Application | Industry |
| Color | Green |
| Automatic Grade | Semi Automatic |
| Maximum Head Pressure | Up to 150 Meter |
| Maximum Flow Rate | Up to 20 M3/hr |
| HP | Up to 18.7 kw |
| Speed of Pump | 1440 RPM |
| Material | Cast Iron, Cast Steel |
| Range | DHM |
Preferred Buyer From
| Location | Anywhere in India |
Horizontal Inline Multistage Pump DHM Range is widely used in Building Water Supply, Fire Fighting System, Boiler Feed Water, Water Works, Water Treatment, High density living, Mine Dewatering, High Pressure cleaning/wash down facilities, Reverse Osmosis, Pressure Boosting Irrigation System, etc. . .
Features- These pumps have high efficiency.
- They have capacity to handle more flow rates than the vertical multistage pumps.
- They need very low vertical floor space.
- it can help in increasing pressure at each stage.
- if high discharge pressures are required, then the rotors in the multistage pump are connected in series.
- On the other hand, if high capacity is needed, then the rotors are connected in parallel.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Industrial Solar Water Heater |
| Certification | ISO 9001:2008 |
| Color | Green |
| Condition | New |
| Outlet Size | 1.25” |
| Hp | Up to 2 Hp |
| Max. Head | Up to 78 Meter |
| Max. Flow | Up to 3 M3/hr |
| Range | DS |
Preferred Buyer From
| Location | Anywhere in India |
Solar Pump DS Range is widely used in mainly involve in the irrigation field, communities for supplying clean water while supplying water from sumps or bore-wells. It can be used even in remote areas, etc. . .
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Application | Industrial |
| Maximum Head Pressure | Up to 60 Meter |
| Maximum Flow Rate | Up to 450 LPM. |
| Power | Up to 3 Kw |
| Speed | 2880 RPM |
| Material | Stainless Steel 316 |
| Orientation | Horizontal |
| Range | DLHMRange |
Preferred Buyer From
| Location | Anywhere in India |
Light Horizontal Multistage Centrifugal Pump DLHM Range is widely used in Mineral Water, Pure Water, Soft Water, Edible Oil and other light chemicals mediums, Chlorine Content, Solvent, Clean, Non-flammable and Non-explosive liquid, etc. . .
Features
- These pumps have high efficiency.
- They have capacity to handle more flow rates than the vertical multistage pumps.
- They need very low vertical floor space.
- it can help in increasing pressure at each stage.
- if high discharge pressures are required, then the rotors in the multistage pump are connected in series.
- On the other hand, if high capacity is needed, then the rotors are connected in parallel.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Magnetic Drive Centrifugal Pump |
| Color | Green |
| Driven Type | Electric |
| Condition | New |
| Material | Polypropylene |
| Maximum Head Pressure | Up to 32 Mtr |
| Maximum Flow Rate | Up to 600 Lpm |
| Operating Temprature | Up to 80 C |
| Speed | Up to 2880 Rpm |
| Range | DMD |
Preferred Buyer From
| Location | Anywhere in India |
Seal Less Magnetic Drive Chemical Process Pump our DMD Range is widely used in Plating Chemicals, kerosene, Corrosive chemicals, Acids, Dyes, Solvent, toxic & fuming liquid, Food Processing industries, Chemical & Pharma Industries, Galvanizing/Anodizing Plants, Medical Equipment’s and X-Ray film Plants, PCB Plants, etc. . .
Features
- 100% Leak Proof pumps due to magnetic drive arrangement. No shaft seal is used which automatically solves the problem of seal leakage and wear & tear.
- Based on design of magnetic drive pumps there is extremely low risk of fluid and vapor emissions from being leaked. As a result, people working on or near the pump are not exposed to dangers from hazardous, corrosive, flammable and/or explosive fluids, and other toxic chemicals. In addition, expensive liquids are not wasted.
- Another huge benefit associated with magnetic drive pumps is because of an easy coupling there is no need for an alignment of the pump or motor
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Monoblock Centrifugal Pump |
| Application | Liquid Supply |
| Voltage | 440V |
| Automatic Grade | Semi Automatic |
| Driven Type | Electric |
| Maximum Head Pressure | Up to 80 Meter |
| Maximum Flow Rate | Up to 150 M3/hr |
| HP | Up to 20 HP |
| Speed | 2900 Rpm |
| Maximum Temperature Capacity | Up to 90֯ C |
| Material | Cast Iron, Cast Steel, Stainless Steel |
| Range | DCM |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Centrifugal Mono-Block Process Pump our DCM Range is widely used for freshwater as well as fluids which are not chemically violent toward the components of the pump. These pumps are mainly used for agriculture, industrial, Cooling tower, Domestic use in apartment, Swimming pools, Power plants, Railway line, Automobile, civil due to their consistency and strength.
Features
- Dynamically balanced rotating parts ensure minimum vibrations .
- Designed for automatic air release during priming .
- Class of insulation ‘B’ / ‘F’ Class.
- Simple in Construction due to les number of parts.
- Less Maintenance Cost.
- Inside and outside of pump covered by anticorrosive paint
- Continuous rated motor .
- Suitable for large discharge with small head.
- Their Output is very steady and consistent
- Designed to prevent overloading and motor burning .
- Less Wear and tear and can handle dirty water.
- Replaceable wearing parts results in longer life .
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Motorised Barrel Pump |
| Material | PP/SS |
| Color | Green |
| Condition | New |
| Power | 0.88 Kw |
| Outlet Size | 3/4″ |
| Speed of Pump | 10000 RPM |
| Range | DMB |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Motorised Barrel Pump DMB Range is widely used in highly corrosive chemicals, solvents, acids, petroleum products, diesel oil and fuel oils, plating solution, toxic chemicals to empty containers, carboys, and tanks, etc. . .
| Business Type | Manufacturer, Exporter, Supplier |
| Country of Origin | India |
| Type | Motorised Hydro Test Pump |
| Color | Green |
| Power Source | Electric |
| Pressure Max | Up to 1000 Kg/cm2 |
| Capacity | Up to 150 Lph |
| HP | Up to 7.5 |
| Pump With | Motor Pulley, Pump Guard, Motor Switch, Trolley Wheel |
| Range | DMH |
Preferred Buyer From
| Location | Anywhere in India |
Hydro Test Pump DHH & DMH Range is widley used in Boilers, pressure vessels, C. I. mains, casting parts Gas cylinder, pipes & tubes parts etc. . .
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Certification | ISO 9001:2008 |
| Color | Silver |
| Theory | Centrifugal Pump |
| Pressure | High Pressure |
| Maximum Head Pressure | Up to 74 Mtr |
| Maximum Flow Rate | Up to 2260 LPM |
| HP | Up to 15 HP |
| Sealing Arrangement | Mechanical Seal Fitted |
| Impeller Type | Non-Clog Semi Open |
| Material | Cast Iron, Cast Steel, SS-304/L, SS-316/L |
| Range | DOS |
Preferred Buyer From
| Location | Anywhere in India |
Horizontal Open well Submersible Centrifugal Pump DHOSP Range is widely used in a Dewatering, Mud, Marine, Effluent, Hotel, Loading & Transfer of Oils, Spirits, Swimming Pools, Gas Oils, Engine Cooling, Vessels, ETP, STP, Water for marine Engine and Shovels, Kerosene, etc . . .
Features
- Dry type submersible induction motor Class “F” insulation .
- Shaft and fasteners are in stainless steel to enhance life .
- Impeller and casing are coated with chemical resistance coating to improve life and performance .
- Cable connectors filled with resin prevents water leakage into the motor through the cable wire .
- Dual mechanical seal prevents water entry into the dry motor portion at two interfaces, one at pump portion to oil chamber and another at oil chamber to dry motor portion .
- Open type impeller prevents clogging of small solids and allows sand and silt to pass through. .
- Solid handling size up-to 10 mm .
- Built-in miniature thermal overload protector prevents coil from burning out due to improper line voltage, impeller jam and high temperature etc.,
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Plunger Pump |
| Certification | ISO 9001:2008 |
| Application | Industrial |
| Condition | New |
| Automation Grade | Semi Automatic |
| Max. Head Pressure | Up to 250 Bar |
| Max. Flow Rate | Up to 28000 LPH |
| Max. Temperature | Up to 200 Degree c |
| Range | DP |
Preferred Buyer From
| Location | Anywhere in India |
Plunger Pump DP Range is widely used in cleaning, disinfection, pest control, agriculture, Automobile and other applications in their electrically powered equipment such as pressure washers, atomizers, and sprayers, etc. . .
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Pneumatic Submersible Pump |
| Certification | ISO 9001:2008 |
| Application | Industrial |
| Color | Green |
| Material | Cast Iron |
| Size | 2″ or 2.5″ BSP |
| Max. Flow Rate | Up to 1000 Lpm |
| Max. Head Pressure | Up to 27 Meter |
| Air Hose | 3/4″ NPT |
| Range | DPS |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Pneumatic Submersible Pump DPS Range is widley used in sumps for periodic dewatering, Draining cargo holds during & after washing procedure, Sea water from bilges, Holds, Construction, Marine, etc. . .
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Distributor |
| Color | Green |
| Condition | New |
| Type | Chemical Process Pump |
| Country of Origin | India |
| Maximum Head Pressure | Up to 70 Mtr |
| Maximum Flow Rate | Up to 70 M3/hr |
| Design Pressure | 8 Bar |
| Maximum Temperature Capacity | Up to 120 C |
| Speed | Up to 2880 Rpm |
| Impeller Design | Non Clog Semi Open |
| Material | Polypropylene, U.H.M.W.E |
| Range | DPP |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Polypropylene Chemical Process Pump our DPP, DPM & DPV Range is widely used in Effluent plant, Transfer and loading/unloading HCL, Sulphuric acid, Caustic liquid, Water treatment, Corrosive Gasses NH3, Co2, So2 , Alkali, Treatment plant, electro plating & steel rolling mills, ideal for Circulation of chemical in metal finishing industries.
Features
- Corrosion Resistant Polypropylene Pumps ensure continuous work for hours and hours
- Comes with a dynamic and hydraulically balanced impeller with aerodynamic profile vanes
- Have a solid molded casing and impeller long life and a minimum of wear
- Top centerline discharge and Integrated flanges, Single piece, joint less casing formed out of Injection molded polypropylene / pVDF / UHMWpE.
- Can suit extremely corrosive duties in the process and Chemical Industries without creating any hassle in the process and productivity. Simple in Construction due to les number of parts.
- Mainly used for treating effluent
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Monoblock Pumps |
| Certification | ISO 9001:2008 |
| Application | Liquid Supply |
| Theory | Centrifugal Pump |
| Automatic Grade | Semi Automatic |
| Maximum Head Pressure | Up to 23 Mtr |
| Maximum Flow Rate | Up to 30 M3/hr |
| Design Pressure | 5 Bar |
| Maximum Temperature Capacity | Up to 120 C |
| Speed | Up to 2880 Rpm |
| Impeller Design | Non Clog Semi Open |
| Material | Polypropylene, U.H.M.W.E |
| Range | DPM |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Polypropylene Chemical Process Pump our DPP, DPM & DPV Range is widely used in Effluent plant, Transfer and loading/unloading HCL, Sulphuric acid, Caustic liquid, Water treatment, Corrosive Gasses NH3, Co2, So2 , Alkali, Treatment plant, electro plating & steel rolling mills, ideal for Circulation of chemical in metal finishing industries.
Features
- Corrosion Resistant Polypropylene Pumps ensure continuous work for hours and hours
- Comes with a dynamic and hydraulically balanced impeller with aerodynamic profile vanes
- Have a solid molded casing and impeller long life and a minimum of wear
- Top centerline discharge and Integrated flanges, Single piece, joint less casing formed out of Injection molded polypropylene / pVDF / UHMWpE.Can suit extremely corrosive duties in the process and Chemical Industries without creating any hassle in the process and productivity. Simple in Construction due to les number of parts.
- Mainly used for treating effluent
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Polypropylene Vertical Pump |
| Material | Polypropylene |
| Color | Green |
| Pressure | High Pressure |
| Maximum Head Pressure | Up to 40 Mtr |
| Maximum Flow Rate | Up to 830 Lpm |
| Design Pressure | 5 Bar |
| Maximum Temperature Capacity | Up to 120 C |
| Speed | Up to 2880 Rpm |
| Impeller Design | Non Clog Semi Open |
| Range | DPV |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Polypropylene Chemical Process Pump our DPP, DPM & DPV Range is widely used in Effluent plant, Transfer and loading/unloading HCL, Sulphuric acid, Caustic liquid, Water treatment, Corrosive Gasses NH3, Co2, So2 , Alkali, Treatment plant, electro plating & steel rolling mills, ideal for Circulation of chemical in metal finishing industries.
Features
- No mechanicar sear, stuffing box and internar bearings is needed
- Reduction of downtime production losses in view of above features.
- The impeller is semi-open type and used in our ar-verticar pumps to suit both clear and polluted fluids
- Pump mounted outside the suction tank and is not submerged type.
- Polypropylene is manufactured by solid injection molding with high pressure hence.
- Corrosion Resistant Polypropylene Pumps ensure continuous work for hours and hours
- Comes with a dynamic and hydraulically balanced impeller with aerodynamic profile vanes
- Have a solid molded casing and impeller long life and a minimum of wear
- Can suit extremely corrosive duties in the process and Chemical Industries without creating any hassle in the process and productivity
- Mainly used for treating effluent
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Progressive Cavity Pumps |
| Certification | ISO 9001:2008 Certified |
| Power | Electric |
| Pressure | High Pressure |
| Structure | Screw Pump |
| Maximum Head Pressure | Up to 120 Meter |
| Maximum Flow Rate | Up to 35000 LPH |
| Size | Up to 8” |
| Speed of Pump | 360 RPM |
| Material | Cast Iron, Cast Steel, SS-304/L, SS-316/L |
| Range | DPS |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Progressive Cavity Screw Pump DPS Range is widely used in Oil Industries, Mining Industries, High Viscous Liquids, Hydraulic System, etc. .
Features
- Slow Speed, Simple and Rugged design
- Pumps raw water with heavy solids and floating debris
- Can run without water
- Constant high efficiency with variable capacity
- Pump capacity is self-regulating with incoming level
- Easy maintenance
- Long lifetime
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Rotary Gear Pump |
| Certification | ISO 9001:2008 |
| Color | Silver |
| Condition | New |
| Maximum Head Pressure | Up to 100 Meter |
| Maximum Flow Rate | Up to 500 LPM |
| Size | Up to 3” |
| Speed | 1440 RPM |
| Material | Cast Iron, Cast Steel, SS-304/L, SS-316/L |
| Range | DRG |
Preferred Buyer From
| Location | Anywhere in India |
Rotary Gear Pump DRG Range is widely used in Oil Industries, Mining Industries, High Viscous Liquids, Hydraulic System, etc. . .
Features
- Easy to use and maintain
- Low cost
- Relatively silent operation
- High work efficiency
- Insensitive to fluid viscosity and density
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Rotary Lobe Pumps |
| Certification | ISO 9001:2008 |
| Color | Green |
| Condition | New |
| Automatic Grade | Semi Automatic |
| Maximum Head Pressure | Up to 7 Kg/cm2 |
| Maximum Flow Rate | Up to 48000 LPH |
| Size | Up to 5” |
| Pump Speed | 400/520/720/960 rpm |
| Material | Stainless Steel 316 |
| Range | DL |
Preferred Buyer From
| Location | Anywhere in India |
Lobe Pump our DL Range is widely used in Pulp & Paper Industries, Chemical Industries, Food Industries, Beverage Industries, Pharmaceutical Industries, Biotechnology Industry, Polymers, Soaps and surfactants, Paints and dyes, Rubber and adhesives, Food applications, etc. . .
Features
- Lobe pumps can handle solids, slurries, pastes and many liquid.
- No metal-to-metal contact.
- Superior CIP(Cleaning in Place) /SIP(Sterilization in Place) capabilities.
- Long-term dry run (with lubrication to seals).
- Non-pulsating discharge.
