| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Sanitary Centrifugal Pump |
| Application | Sewage |
| Range | DCS & DCSM |
| Maximum Head Pressure | Up to 3-76 Mtr |
| Maximum Flow Rate | Up to 1890 LPM |
| Size | 12mm to 100 mm |
| Speed | Up to 3500 Rpm |
| Design Type | End Suction & Mono-Block |
| Material | Stainless Steel 316 |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Features
Read More...
Centrifugal Sanitary Process Pump our DCS, DCSM Range is widely used in a variety of commercial and industrial applications. Like, Agriculture, Horticulture, Brewery and Distillery, Dairy, Food Processing, Food Service, Medical, Pharmaceutical & Biotechnology applications.
Features
- It requires minimum space for installation.
- It can be easily installed.
- This Pump easily transport the suspended matter present in sewage without getting clogged.
- The working process is simple.
- It is cheap in cost.
- This pump can not be damaged due to high pressure.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Self Priming Pumps |
| Certification | ISO 9001:2008 |
| Color | Green |
| Condition | New |
| Maximum Head Pressure | Up to 65 Mtr |
| Maximum Flow Rate | Up to 125 LPM |
| Size | 0.5 HP to 3 HP |
| Speed | 1440/2880 rpm |
| Design Type | End Suction & Mono-Block |
| Material | Stainless Steel 316 |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Read More...
Self Priming Barrel Pump DBP Range is widely used in a clear liquids without solid suspensions like Petrol, LPG, Oil, Diesel, Solvents, Syrup, Chemicals, Steam Boiler Feeding, DM Water, Boosting of Pressure.
Features
- Barrel pumps must be small and lightweight
- achievable head pressure are often limited
- barrel pumps are usually fitted with strainers and filters.
- Inside and outside of pump covered by anticorrosive paint.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Self Priming Mud Pump |
| Weight | 10-20kg |
| Color | Green |
| Condition | New |
| Maximum Head Pressure | Up to 35 Mtr |
| Maximum Flow Rate | Up to 75 M3/hr |
| Size | 1 ¼” to 2 ½” |
| Speed | 2880 Rpm |
| Sealing Arrangement | Mechanical Seal Fitted |
| Impeller Type | Non-Clog Semi Open |
| Material | Cast Iron, Cast Steel, WCB, SS-304/L, SS-316/L, Alloy 20, Hastelloy C |
| Range | DSPM |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Self Priming Mud Pump DSPM, DSM, DSMM Range is widely used in a Dewatering, Mud, Marine, Effluent, Hotel, Loading & Transfer of Oils, Spirits, Swimming Pools, Gas Oils, Engine Cooling, Vessels, ETP, STP, Water for marine Engine and Shovels, Kerosene, etc . . .
Features
- Automatic air release during priming.
- Transfer Heavy Sewage Liquid.
- Dynamically balanced rotating parts ensure lesser vibrations.
- Minimum parts & fast repairing at low cos! pump is also available at economical rate.
- Available in Bare, Coupled, Monoblock, Beit driven & Engine driven version.
- Back pull out design, so easy maintenance can be done without disturbing pipe lines.
- Also offered pump with trolley / trailer to move it from one place to another.
- Less expensive & easily available spares.
- Easy inspection of impeller.
- Very simple construction with only two moving parts.
- High resistance. to abrasive liquids. Wear plates are easily replaced and impellers are also available with ceramic coating
- Mechanical Seal & Gland Fitted design as per customer requirement.
- Inside and outside of pump covered by anticorrosive paint.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Certification | ISO 9001:2008 |
| Application | Industrial |
| Fuel | Electric |
| Pressure | High Pressure |
| Material | Cast Iron, Cast Steel, SS-304/L, SS-316/L |
| Maximum Head Pressure | Up to 55 Mtr |
| Maximum Flow Rate | Up to 119 M3/hr |
| HP | Up to 40 HP |
| Speed | 2880 rpm |
| Sealing Arrangement | Dual Mechanical Seal Fitted |
| Impeller Type | Non-Clog Semi Open |
| Range | DSD-S |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Vertical Submersible Dewatering Pump DSD-S & DSD-C Range is widley used in
- Pumping waste water in Residential apartments, Multistorey buildings
- Pumping waste water in Hotels, restaurants and hospitals
- Waste water without solids – Sump drainage
- Waste water treatment plants
- Flood water pumping
Features
- Dry type submersible induction motor Class “F” insulation .
- Shaft and fasteners are in stainless steel to enhance life .
- Impeller and casing are coated with chemical resistance coating to improve life and performance .
- Cable connectors filled with resin prevents water leakage into the motor through the cable wire .
- Dual mechanical seal prevents water entry into the dry motor portion at two interfaces, one at pump portion to oil chamber and another at oil chamber to dry motor portion .
- Open type impeller prevents clogging of small solids and allows sand and silt to pass through. .
- Solid handling size up-to 10 mm .
- Built-in miniature thermal overload protector prevents coil from burning out due to improper line voltage, impeller jam and high temperature etc.,
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Side Suction Centrifugal Pump |
| Color | Green |
| Material | Cast Iron, Cast Steel, WCB, SS-304/L, SS-316/L, Alloy 20, Hastelloy C |
| Maximum Head Pressure | Up to 70 Mtr |
| Maximum Flow Rate | Up to 110 M3/hr |
| Impeller Type | Semi |
| Open Speed | Up to 3500 Rpm |
| Range | DSS |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Centrifugal Side Suction Process Pump our DSS Range is widely used in Sugar Industries, Filter Press Feeding, Slurry Transfer, Dyes & Intermediates, Cake Transfer, ETP Plant, Food Industries.
Features
- Dynamically balanced rotating parts ensure minimum vibrations .
- Designed for automatic air release during priming .
- Simple in Construction due to les number of parts.
- Less Maintenance Cost.
- Inside and outside of pump covered by anticorrosive paint
- Suitable for large discharge with small head.
- Their Output is very steady and consistent
- Designed to prevent overloading and motor burning .
- Less Wear and tear and can handle dirty water.
- Replaceable wearing parts results in longer life .
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Stainless Steel Self Priming Pump |
| Certification | ISO 9001:2008 |
| Color | Black |
| Condition | New |
| Maximum Head Pressure | Up to 50 Meter |
| Maximum Flow Rate | Up to 65 M3/hr |
| Power | Up to 1 Kw |
| Speed of Pump | 2880 RPM |
| Material | Stainless Steel 316 |
| Range | DSS |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Stainless Steel Self Priming Pump DSS Range is widely used in Mineral Water, Pure Water, Soft Water, Edible Oil and other light chemicals mediums, Chlorine Content, Solvent, Clean, Non-flammable and Non-explosive liquid
Features
- Suitable with a wide range of liquids
- Slurries, caustic liquids, and suspended solids are no problem for this machine.
- Self Priming centrifugal pumps, unlike submersible pumps, continue to pump liquids even after they have been removed from a liquid tank or vessel.
- Pump priming on start-up is not required, which makes it ideal for frequent and intermittent pumping operations.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Sweage Monoblock Mud Pump |
| Certification | ISO 9001:2008 |
| Application | Liquid Supply |
| Driven Type | Electric |
| Maximum Head Pressure | Up to 35 Mtr |
| Maximum Flow Rate | Up to 75 M3/hr |
| Size | 1 ¼” to 2 ½” |
| Speed | 2880 rpm |
| Sealing Arrangement | Mechanical Seal Fitted |
| Impeller Type | Non-Clog Semi Open |
| Material | Cast Iron, Cast Steel, WCB, SS-304/L, SS-316/L, Alloy 20, Hastelloy C |
| Range | DSMM |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Self Priming Mud Pump DSPM, DSM, DSMM Range is widely used in a Dewatering, Mud, Marine, Effluent, Hotel, Loading & Transfer of Oils, Spirits, Swimming Pools, Gas Oils, Engine Cooling, Vessels, ETP, STP, Water for marine Engine and Shovels, Kerosene, etc . . .
Features
- Automatic air release during priming.
- Transfer Heavy Sewage Liquid.
- Dynamically balanced rotating parts ensure lesser vibrations.
- Minimum parts & fast repairing at low cos! pump is also available at economical rate.
- Available in Bare, Coupled, Monoblock, Beit driven & Engine driven version.
- Back pull out design, so easy maintenance can be done without disturbing pipe lines.
- Also offered pump with trolley / trailer to move it from one place to another.
- Less expensive & easily available spares.
- Easy inspection of impeller.
- Very simple construction with only two moving parts.
- High resistance. to abrasive liquids. Wear plates are easily replaced and impellers are also available with ceramic coating
- Mechanical Seal & Gland Fitted design as per customer requirement.
- Inside and outside of pump covered by anticorrosive paint.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Mud Pump |
| Certification | ISO 9001:2008 |
| Color | Green |
| Condition | New |
| Maximum Head Pressure | Up to 34 Mtr |
| Maximum Flow Rate | Up to 270 M3/hr |
| Speed | 1440/2880 rpm |
| Sealing Arrangement | Gland Fitted/Mechanical Seal Fitted |
| Impeller Type | Non-Clog Semi Open |
| Material | Cast Iron, Cast Steel, WCB, SS-304/L, SS-316/L, Alloy 20, Hastelloy C |
| Range | DSM |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Read More...
Self Priming Mud Pump DSPM, DSM, DSMM Range is widely used in a Dewatering, Mud, Marine, Effluent, Hotel, Loading & Transfer of Oils, Spirits, Swimming Pools, Gas Oils, Engine Cooling, Vessels, ETP, STP, Water for marine Engine and Shovels, Kerosene, etc . . .
Features- Automatic air release during priming.
- Transfer Heavy Sewage Liquid.
- Dynamically balanced rotating parts ensure lesser vibrations.
- Minimum parts & fast repairing at low cos! pump is also available at economical rate.
- Available in Bare, Coupled, Monoblock, Beit driven & Engine driven version.
- Back pull out design, so easy maintenance can be done without disturbing pipe lines.
- Also offered pump with trolley / trailer to move it from one place to another.
- Less expensive & easily available spares.
- Easy inspection of impeller.
- Very simple construction with only two moving parts.
- High resistance. to abrasive liquids. Wear plates are easily replaced and impellers are also available with ceramic coating
- Mechanical Seal & Gland Fitted design as per customer requirement.
- Inside and outside of pump covered by anticorrosive paint.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Certification | ISO 9001:2008 |
| Application | Sewage |
| Color | Silver |
| Material | Cast Iron, Cast Steel, SS-304/L, SS-316/L |
| Maximum Head Pressure | Up to 45 Mtr |
| Maximum Flow Rate | Up to 645 M3/hr |
| HP | Up to 60 HP |
| Speed | 1440 rpm |
| Sealing Arrangement | Dual Mechanical Seal Fitted |
| Impeller Type | Non-Clog Semi Open |
| Range | DSD |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Vertical Submersible Sweage Pump DSD Range is widley used in
- Pumping waste water in Residential apartments, Multistorey buildings
- Pumping waste water in Hotels, restaurants and hospitals
- Waste water without solids
- Sump drainage
- Waste water treatment plants
- Flood water pumping
- Sweage Applications
Features
- Dry type submersible induction motor Class “F” insulation .
- Shaft and fasteners are in stainless steel to enhance life .
- Impeller and casing are coated with chemical resistance coating to improve life and performance .
- Cable connectors filled with resin prevents water leakage into the motor through the cable wire .
- Dual mechanical seal prevents water entry into the dry motor portion at two interfaces, one at pump portion to oil chamber and another at oil chamber to dry motor portion .
- Open type impeller prevents clogging of small solids and allows sand and silt to pass through. .
- Solid handling size up-to 10 mm .
- Built-in miniature thermal overload protector prevents coil from burning out due to improper line voltage, impeller jam and high temperature etc.,
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Thermic Fluid Hot Oil Centrifugal Pump |
| Color | Green |
| Driven Type | Electric |
| Condition | New |
| Material | Cast Iron, Cast Steel, WCB, SS-304/L, SS-316/L, Alloy 20, Hastelloy C |
| Cooling Method | Air Cooled |
| Maximum Head Pressure | Up to 100 Mtr |
| Maximum Flow Rate | Up to 250 M3/hr |
| Design Pressure | 12 Bar |
| Maximum Temperature Capacity | Up to 350֯ C |
| Speed | Up to 3500 Rpm |
| Range | DTF |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Hot Oil Thermic Fluid Pump our DTF Range is widely used in Hot Oil Transfer, Plastic Industry, Paper industry, Synthetic Oil Transfer, Hot Water Supply, District Heating System, Mineral Oil Industry, Petro Chemical Industry, Textile Dyeing, Printing Industry, Rubber Industry, Timber Processing Industry & Construction Industry.
Features
- Low Maintenance.
- The Pump and the motor are connected by means of a flexible coupling on a common baseplate.
- Without dismantling the suction and the discharge systems “the shaft and other rotating parts can be removed.”
- High Strength.
- Single Stage and end suction centrifugal pump.
- Inside and outside of pump covered by anticorrosive paint.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Vertical Inline Pump |
| Shape | Vertical |
| Certification | ISO 9001:2008 |
| Color | Silver |
| Condition | New |
| Maximum Head Pressure | Up to 310 Meter |
| Maximum Flow Rate | Up to 110 M3/hr |
| HP | Up to 45 Kw |
| Speed of Pump | 2880 RPM |
| Material | Cast Iron, Cast Steel, Stainless Steel 304, Stainless Steel 316 |
| Range | DVM |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Read More...
Vertical Inline Multistage Pump DVM Range is widely used in Building Water Supply, Commercial Reverse Osmosis system & De Mineralizing systems, Fire Fighting System, Boiler Feed Water, Water Works, Agricultural irrigation, Water Treatment, Irrigation System, etc.
Features- It requires less space in the horizontal direction.
- They have an easy installation.
- They require less maintenance than the horizontal pumps.
- it can help in increasing pressure at each stage.
- if high discharge pressures are required, then the rotors in the multistage pump are connected in series.
- On the other hand, if high capacity is needed, then the rotors are connected in parallel.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Type | Vertical Sump Pump |
| Shape | Vertical |
| Certification | ISO 9001:2008 |
| Color | Green |
| Condition | New |
| Maximum Head Pressure | Up to 150 Mtr |
| Maximum Flow Rate | Up to 500 M3/hr |
| Design Pressure | 16 Bar |
| Maximum Temperature Capacity | Up to 200֯ C |
| Impeller Type | Semi Open / Close |
| Speed | 1440/2880rpm |
| Material | Cast Iron, Cast Steel, Wcb, Ss-304/l, Ss-316/l, Alloy 20, Hastelloy C |
| Range | DSP |
Preferred Buyer From
| Location | Anywhere in India |
Applications
Centrifugal Vertical Long Shaft Sump Pump our DSP Range is widely used in Sump drainage, Air wash system, Dewatering Service, Power Plants, Utility Service, Food Control, Industrial processes, Wet pit, Condensation control, Pollution Control, Dewatering Service, Process Plant, Water treatment, Effluent, Polymers, Hydrocarbon processing, Automotive Solvents, General Industry, Plating & Electroplating, Pharmaceuticals, Chemical Industries, Petrochemical Industry.
Features
- Dynamically balanced rotating parts ensure minimum vibrations .
- Designed for automatic air release during priming .
- Simple in Construction due to les number of parts.
- Less Maintenance Cost.
- Inside and outside of pump covered by anticorrosive paint
- Suitable for large discharge with small head.
- Their Output is very steady and consistent
- Designed to prevent overloading and motor burning .
- Less Wear and tear and can handle dirty water.
- Replaceable wearing parts results in longer life .